Futaba CDR-5000 Charger - Manual (Page 29)

30
CDR-5000 Functions
OUTSIDE TEMP.
This shows the temperature measured by Thermo Sensor utilized in CDR-5000.
HUMID
This shows the humidity near the CDR-5000.
BATTERY TEMP.
This shows the temperature measured by Thermo Sensor. If Thermo Stand (option) is used, this shows
the temperature measured by Thermo Stand.
INPUT
This shows the voltage of the power source.
[Contents of DX DATA02 -10]
SET AMPERE
This shows the current for charging or discharging set in the "SET-UP".
CUT-OFF VOLT.
This shows the voltage to stop charging or discharging set in the "SET-UP".
PEAK VOLT.
This shows the peak voltage of a battery that is obtained while the battery is charged.
AVERAGE VOLT.
This shows the average voltage of a battery that is obtained while the battery is charged or discharged.
FIRST STAGE
This shows the estimated average voltage of a battery at an early stage of discharging process by using
the time consumed for discharging from the beginning to the end.