Reference, Specifications, Refer ence – Futaba CDR-5000 Charger User Manual

Page 42

Advertising
background image

43

Refer

ence

Reference

*Specifications and ratings are subject to change without prior notice.

Specifications

•Batteries

NiCd / NIMH batteries

•Input voltage

DC 12 - 16V (The guaranteed operating range is from
11V to 16V.)

•Charging current

DX port:
0.08 < Battery Voltage

18V: 0.1 -12A (0.01A step)

18 < Battery Voltage

27V: 0.1 - 8A (0.01A step)

27 < Battery Voltage

36V: 0.1 - 6A (0.01A step)

36 < Battery Voltage

43V: 0.1 - 5A (0.01A step)

43 < Battery Voltage

54V: 0.1 - 4A (0.01A step)

54 < Battery Voltage

62V: 0.1 - 3A (0.01A step)

TX&RX port:
0.05 - 2A (0.01A step)

•Charge-cut methods

DX port:
Detection by Delta Peak (Zero Delta, 3 - 50mV/cell)
Detection by battery temperature (25 - 75 degrees in
Celsius)
Detection by the maximum voltage (0.1 - 62V)
Detection by capacity (50 - 9999mAh)

•Discharging current

DX port:
0.1 < Battery Voltage

2.4V: 0.1 - 40A (0.01A step)

2.4 < Battery Voltage

7.5V: 0.1 - 40A (0.01A step)

7.5 < Battery Voltage

8.5V: 0.1 - 35A (0.01A step)

8.5 < Battery Voltage

10V: 0.1 - 30A (0.01A step)

10 < Battery Voltage

12V: 0.1 - 25A (0.01A step)

12 < Battery Voltage

15V: 0.1 - 20A (0.01A step)

15 < Battery Voltage

20V: 0.1 - 15A (0.01A step)

20 < Battery Voltage

30V: 0.1 - 10A (0.01A step)

30 < Battery Voltage

40V: 0.1 - 7.5A (0.01A step)

40 < Battery Voltage

50V: 0.1 - 6A (0.01A step)

50 < Battery Voltage

60V: 0.1 - 5A (0.01A step)

60 < Battery Voltage

62V: 0.1 - 4A (0.01A step)

TX&RX port:
below 10V: 0.1 - 5A (0.01A step)
above 10V: 0.1 - 3A (0.01A step)

•Discharge-cut methods

Detection by voltage: 0.8V/cell, 0.85V/cell, 0.9V/cell
Detection by time: 10 - 59940 seconds (999 minutes)

•Measurable temperature range

5 - 99 degrees Celsius

•Measurable humidity range

20 - 95%

•Expansion terminals

Thermo Stand port (Thermo Stand is an option)
Terminal Harness port (Terminal Harness is included
in a set)
PC port (only for the factory)
Printer port (only for factory)

•Screens

192 x 128 dot graphic LCD with backlight

•LEDs

Red : charging at DX or TX&RX
Blue: discharging at DX or TX&RX

•Power consumption

Less than 8W at 12V (at idle)

•Operating temperature

5 - 40 degrees Celsius

•Storage temperature

-20 - 60 degrees Celsius

•Size

170 x 170 x 83mm (excluding cords and terminals)

•Weight

1200g

•Protection circuits

Protection circuits against overload, reverse connec-
tion and overheat

Advertising