Futaba CDR-5000 Charger - Manual (Page 39)

40
CDR-5000 Functions
At the bottom:
AVE : average discharging voltage for all cells.
TIME : discharging time
At the right on the screen:
POWER: Power level
MATCH: matched level
<How to operate>
In order to check the data of each cell, select the cell number by pushing "ENTER" key. Pushing
"ENTER" key gives the data of "AVE" after the cell number blinking at the bottom on the screen.
Pushing "ENTER" key each time shows cell number sequentially from "C1", "C2", "C3", "C4",
"C5", "C6". Pushing "ENTER" key after "C6" shows the average discharging voltage for all cells.
Pushing "GRAPH" or " " key in the "GRAPH Screen Page8" will show the "GRAPH Screen
Page9". Pushing " " will show "GRAPH Screen Page7".
[GRAPH Screen Page 9(ENVIRONMENT INFORMATION ºC-%/TIME)]
Pushing "GRAPH" or " " key in the "GRAPH Screen Page8" will show the "GRAPH Screen
Page9".
This bar graph shows temperature and humidity measured by Thermo Sensor built-in CDR-5000. Graph
type is shown on the screen.
*At the bottom:
OUTSIDE TEMP : temperature measured by the Thermo Sensor equipped with DR-5000
HUMID : humidity
<How to operate>
A cursor line vertical to the time axis will appear by pushing " " key.
The cursor line can be moved left and right by pushing " " and " " keys.
*The messages at the bottom of the screen will change when the cursor line appears.
At the bottom,
Temperature and Humidity
O.H : humidity
Before : the time where the cursor line is crossing the time axis
Pushing " " and " " keys simultaneously will erase the cursor and move back to the screen of
"OUTSIDE TEMP" and "HUMID".
Pushing "GRAPH" or " " key in the "GRAPH Screen Page9" will show the "GRAPH Screen
Page1". Pushing " " will show "GRAPH Screen Page8".