Futaba CDR-5000 Charger - Manual (Page 38)

39
CDR-5000 Functions
V: output voltage
B,T: temperature of the battery
CELL numbers (1-6) are shown at the second line from the bottom on the screen.
At the bottom:
PEAK: peak charging voltage for all cells.
TIME: charging time
At the right on the screen:
POWER: power level
MATCH: matched level
<How to operate>
In order to check the data of each cell, select the cell number by pushing "Enter" key. Pushing
"Enter" key each time shows cell number sequentially from "C1", "C2", "C3", "C4", "C5", "C6".
Pushing "Enter" key after "C6" shows the peak charging voltage for all cells.
Pushing "Graph" or " " key in the "GRAPH Screen Page7" will show the "GRAPH Screen Page8".
Pushing " " will show "GRAPH Screen Page6".
[GRAPH Screen Page 8 (DIS 6-AV/CELL)]
Pushing "Graph" or " " key in the "GRAPH Screen Page7" will show the "GRAPH Screen Page8".
This bar graph shows the average voltages of each cell in discharging mode. (Not applicable to a battery
of 7 cells or more.) Although no graphs will be shown during charging ("no data" will be shown), the
graph of the previous discharging graph will be shown after discharging is completed in cycle mode.
*The messages on the top of the screen are (from left to right):
Graph type and discharging current appears alternatively. (while discharging)
V: output voltage
B,T: temperature of the battery
CELL numbers (1-6) are shown at the second line from the bottom on the screen.