Futaba CDR-5000 Charger - Manual (Page 36)

37
CDR-5000 Functions
[GRAPH Screen Page 4 (DIS 6-V/Time)]
Pushing "Graph" or " " key in the "GRAPH Screen Page3" will show the "GRAPH Screen Page4".
This graph shows the relationship between the discharging time and cell voltage. (Connect Terminal
Harness to the batteries. This is not applicable to a battery of 7 cells or more.) Although no graphs will
be shown during charging, the graph of the previous charging graph will be shown after charging is
completed in cycle mode.
*The messages on the top of the screen are (from left to right):
Graph type and discharging current appears alternatively. (while discharging)
V: output voltage
B.T: temperature of the battery
CELL numbers (1-6) are shown at the bottom on the screen.
<How to operate>
See page 36 for the operating instructions.
Pushing "Graph" or " " key in the "GRAPH Screen Page4" will show the "GRAPH Screen Page5".
Pushing " " will show "GRAPH Screen Page3".
[GRAPH Screen Page 5 (TERMINAL HARNESS)]
Pushing "Graph" or " " key in the "GRAPH Screen Page4" will show the "GRAPH Screen Page5".
The voltages of each cell are shown on the screen. (Connect Terminal Harness to the batteries. Not
applicable to a battery of 7 cells or more)
<How to operate>
Pushing "Graph" or " " key in the "GRAPH Screen Page5" will show the "GRAPH Screen Page6".
Pushing " " will show "GRAPH Screen Page4".