YSI 6200 - Manual (Page 107)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 9-15
Cellular modem Communication
Only one change is necessary to the cellular active profile, change the S0 register to =2, this
value will force the phone to auto answer on the second ring.
SYMPTOMS POSSIBLE CAUSE ACTION REF
Depleted battery Check battery voltage, replace if
necessary 4.3
Damaged modem at base
station or corrupted modem
profile Check with another modem, use
terminal emulator to check
modem profile 6.5
Cellular provider is off line Contact provider and ask if they
are experiencing overload traffic
problems 6.5
Damaged modem at site or
corrupted modem profile Visit site, verify 6200 DCP is
operational, if available, use a
cellular handset to accept a voice
call. If call does not make it
through, check modem active
profile, signal strength, signal
quality, consult with cellular
modem for commands.
If call comes through and the
voice is clear, the problem is
probably with the 6200 DCP.
Return unit to the factory. 6.6
Cellular modem
6200 DCP will not
respond to the base
station modem
Cell power timing window
doesn’t match EcoWatch Daylight savings time may have
shifted the Base station. Either
turn off daylight savings or go to
field station with laptop and
synchronize clocks. 6.6