YSI 6200 User Manual
Page 26
YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 2-17
EcoWatch DCP interrogation timing. Even when EcoWatch DCP is not running, the DCP
continues to log data to its memory once it has been configured.
The next selection gives you the choice of interrogating the DCP at the same rate as the sample
interval or, alternatively, choosing some number of minutes independent of the DCP sample
interval. For the 6200 Test, set the interrogation schedule to “Same as Sample Interval” by
clicking on the box just to the left of this choice. Also change the Sample Interval to 2 or 3
minutes during the checkout routine in order to collect readings more quickly.
1
Now click on the Communication/Power folder and verify that communication is Direct
Connect to PC and the COM port agrees with the serial port to which you are connected
(COM1 in our example screen). The power option should be Battery. The information related
to MODEM communications is not relevant at this point.