YSI 6200 User Manual
Page 76
YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 7-9
By clicking on one of the “tabs” at the bottom of the window you can move back and forth
among the data tables. Note, you can not display more than one data table at a time and the
maximum number of readings is 7 sets (or rows) of data.
[dock2.s62: <noname 100> [100]- Direct Connect [COM1]
Once you complete the autoconfiguration steps, a window with a data table similar to that seen
above should appear. The status box (bottom left) should display Waiting…, indicating that
EcoWatch DCP is waiting for the next interrogation. The status box (bottom right) indicates the
time to the next interrogation (5:26 in the illustration above). Next to the time status box is a
number indicating samples collected from the DCP. SAMP:0 indicates that no samples have
been uploaded since this 6200 DCP started taking data, which is what you would expect in this
example of opening a new file.
Messages that you may see in the left status box are listed below. All are self-explanatory.
♦
Hanging up MODEM...
♦
Waiting...
♦
Interrogating...
♦
Closing COM port...
♦
Hanging up MODEM...
♦
Opening COM port...
♦
Check
MODEM...
♦
Load MODEM option...
♦
Initialize
MODEM...
♦
Reinitialize
MODEM...