YSI 6200 - Manual (Page 119)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page A-11
Transmitter
Bandspread
15 MHz VHF
Frequency stability 5 ppm
RF power output 5 watt, programmable to 2 watt
RF output impedance 50
Ω
Modulation distortion <4%
Duty cycle 50%
Transmitter attack time 14 ms maximum
Spurious and harmonics -50 dBc maximum
FM hum and noise 43 dB
Modulation input impedance 100 K
Ω
@ both pins 1 and 8
Modulation response @ Pin 1: 20 - 5000 Hz
±
1.5 dB
Modulation response @ Pin 8: Deviation limited with 3 KHz low pass filtered
Current drain 1500 mA @ 10 VDC at 5 watts, 800 mA @ 10 VDC at 2 watts
Receiver
Bandspread
15 MHz VHF, 20 MHz UHF
Frequency stability 5 ppm
Sensitivity 12 dB SINAD: 0.25 uV VHF, 0.3 uV UHF
RF input impedance 50
Ω
Selectivity 70 dB @ 30 KHz, 65 dB @ 25 KHz
Spurious and image rejection 50 dB
Intermodulation 65 dB
FM hum and noise 45 dB
Conducted spurious -60 dBm VHF, -40 dBm UHF at RF connector
Receive current drain 65 mA VHF, 75 mA UHF
Receive attack time <12 ms
Carrier attack detect time 13 ms @ 1 uV
RSSI attack time <12 ms @ 1 uV
Audio distortion < 3%
Audio output level 0 - 8 V p-p into 8
Ω
Audio response internally user selectable: flat, de-emphasized, high pass filtered
Warranty
1 year