YSI 6200 - Manual (Page 74)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 7-7
Next, EcoWatch DCP offers a list of communication options from which you must select the
mode of communication that you will be using between the field installed 6200 DCP and the
base station. Remember, even though you are now communicating with an RS-232 direct link
connection, the information expected here is for field installation. Later in this section you will
enter the appropriate phone number for the phone modem link used in this example setup.
EcoWatch DCP now completes its configuration of the 6200 data collection platform located in
the field station enclosure. A ConfigWizard screen appears as the configuration routine
proceeds. Various messages appear near the top of the window describing the progress. The
configuration may take 20-30 seconds. Refer to the next few screens shown below.