YSI 6200 - Manual (Page 55)

YSI 6200 DAS USER Manual
YSI/Massachusetts 508.748.0366, Fax 508.748.2543 Page 5-10
6507 Patch Cable
The 6507 Patch Cable is used to connect from the MS-8 on the 6200 DCP to a Junction Box or
Breakout Box. This cable is 6 ft. (1.8 m) long and has a MS-8 on one end and flying leads on the
other. The pin outs are shown below in Figure 5.9.
A
H
B
D
E
C
F
G
Patch Cable or Sonde Connector
Pin A +12 VDC red
Pin B Ground black
Pin F SDI-12 purple or blue
MS-8
“Flying Leads”
Figure 5.9 6507 Patch Cable Pin Outs and Wire Colors