Threading the bobbin thread – SINGER 1500 Izek User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING THE BOBBIN THREAD
1. Raise the needle to its highest position by rotating 2. Remove the bobbin cover plate by pushing the release button to the right
the hand wheel toward you.
while pushing the left corner of plate.
3. Insert the bobbin making sure the bobbin rotates
4. Pull thread through the
5. With a finger held gently on top of the bobbin,
6. Replace the bobbin cover plate onto the
slot (A) and then to the left. pull thread through the slot (B) until you hear a needle plate.
clicking sound, and then leave about 6" (15 cm)