SINGER 1500 Izek User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

10

Use the ( ^) Control Pad to
select “END”.

Push the A Button

®

11

COMBINATIONS

1^-k

h.
t'-i

► DfiTfl TRANSFER

ADD TO FADORITTS

RETURN

-*■ ■ NW- S; w. ■ ‘ j ' • vx?C':.' •<.*■'

Push the A Button

12A

COMBINATIONS

SEE SET-UP GUIDE?

—YES

► NO

Use the (Y) Control Pad to
add the stitch pattern to your

favorites (refer to page 31), or

to return to the previous
screen.

___If you do not wish to view

the set-up guide screen.

Push the A Button

DATA TRANSFERRED.-

1 3

(COMBINATIONS)

I

(PATTERNS)

COMBINATIONS

k:

TRANSFERRED

START

SEWING MACHINE

start the machine.

COMBINATION
sewing sample

At the desired location, stop the
sewing machine.

1 5

RE-START TO CONTINUE]

5EWING

_ If you wish to view the set-up guide screen, push

the

( A )

Control Pad to select "YES".

Push the A Button

1 2 B - 1

>)>

Push A Button to change the

size of each pattern.

___ “ADD TO FAVORITES”,

see page 31.

Push the (^) Control Pad

I to select “E”. (end sewing)

Push the A Button

CONNECT POWER PLUG

SEE SETTING UP THE

MnCHINE IN MRNURL

Push the A Button

“SET-UP GUIDE SCREEN’
see page 21.

1 2 B - 2

Push the A Button

DATA TRANSFERRED.

► MODIFY

ADD TO FAUORITI
RETURN

Push A Button to return to
screen 3 (page 29).

------

Error message during setting-up ------------------

If the sewing machine is not set up

correctly, the above message will be
displayed when starting the machine.

1. Push A Button.

2.

The error message will be

displayed.

Fix

the

problem

following the instructions in the

message. (Refer to page 67.)

3. When the error has been cleared,

screen 13 will be displayed.

4. Start the machine.

* The start/stop switch on the sewing machine will flash red for

2 - 3 seconds and will then change to green. However, the
sewing machine will not start again until the cause of the error
has been properly cleared, even if you try to start the machine,
so make sure that you clear the cause of the error properly.

CHECK FLASHING
AREA AND START
SEWING MACHINE

Advertising
This manual is related to the following products: