Set-up guide screen, Turn on power switch, Set thread spool – SINGER 1500 Izek User Manual

Page 23: Thread bobbin turead, Pick up bobbin turead, Place fabric under presser foot, Safety device, Picking up bobbin thread

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SET-UP GUIDE SCREEN

m

ivm-

CONNECT GAME BOY

e

EE CONNECTION OF

RME BOV IN MONUOL

Screen operations: Use the Control Pad ( ^ • ▼ ) to move
the cursor.

Advance to the next screen.

Return to the previous screen.

End.

TURN ON POWER

SWITCH

SEE SETTING UP THE

MACHINE IN MANUAL

SET THREAD SPOOL

THREAD BOBBIN

TUREAD

SEE THREADING

BOBBIN IN MANUAL

PICK UP BOBBIN

TUREAD

SEE PICKING UP

THRERD IN MANUAL

PLACE FABRIC UNDER

PRESSER FOOT

SEE TEST SEWING

IN MANUAL

Above screen appears
when buttonholing

SAFETY DEVICE

This sewing machine is equipped with a safety device which
senses if the thread gets tangled up with the hook during

sewing, and automatically interrupts the flow of current within
3 seconds to stop the motor from operating when such a
problem occurs.

If this safety device has operated, turn off the power for the

sewing machine and eliminate the cause of the problem that
caused the sewing machine to stop.

Then, turn the hand wheel toward you to check that the sewing
machine works normally again, and then re-start the machine.

Error message when the foot controller Is connected'

Push the A Button

A

CHECK

FLASHING AREA

FOOT CONTROL

CONNECTED

This message will be displayed if you

push the start/stop switch when the

foot controller is connected.

Press the foot controller to
start sewing.

Advertising
This manual is related to the following products: