Re-$tftrt t0"c0ntmfl bering, Modify- fldd to ffluorites- return, Error message during setting-up – SINGER 1500 Izek User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When Letters sewing is completed,
the sewing machine will stop
automatically.
LETTERS sewing sample
RE-$TftRT
T0"C0NTMfl
BERING
ABCDEFGH I j'
► MODIFY-
flDD TO FflUORITES-
RETURN
f
-L
Push A Button to return to
screen 2 (page 34).
Push A Button to return to
screen 4. (page 34).
“ADD TO FAVORITES",
see page 37.
.Push the (▼) Control Pad
to select "E" to complete
selection.
Push the A Button
Note: When you have completed sewing the letter string,
pull the threads at the start and end of the string to the
backside and tie off threads to avoid raveling.
Error message during setting-up
CHECK FLASHING
AREA AND START
SEHING MACHINE
If the sewing machine is not set up correctly, the above message
will be displayed when starting the machine.
1. Push A Button.
2. The error message will be displayed. Fix the problem following
the instructions in the message. (Refer to page 67.)
3. When the error has been cleared, screen 7 (page 34) will be
displayed.
4. Start the machine.
*The start/stop switch on the sewing machine will flash red for 2 -
3 seconds and will then change to green. However, the sewing
machine will not start again until the cause of the error has been
properly cleared, even if you try to start the machine, so make
sure that you clear the cause of the error properly.
35