Spool – SINGER 1500 Izek User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SPOOL

Place a felt disc on spool pin to control spool movement. Place a spool of thread on the pin, and secure with a suitable size spool cap,

to ensure smooth flow of thread. Be careful not to push the spool cap too tight as the spool must turn.

Auxiliary spool pins
Some size and style spools of thread do not deliver thread smoothly with horizontal spool pin and spool cap. In this case use vertical
auxiliary spool pin (A). It may not be possible to obtain good thread tension with some spools, so if problems with thread tension occur,

use spool pin (B).

Attach the spool pin (A) and place a felt disc over it. Place a

spool of thread on the spool pin as illustrated.

Spool

Spool pin felt disc

Auxiliary spool

pin (A)

Attach the spool pin (B) and place a spool of thread on the pin, and
secure with a suitable size spool cap as illustrated. With this spool pin
the cap should be installed tightly.

Spool

Auxiliary
spool pin (B)

NOTE:

1. Use the spool cap closest to the thread spool size to ensure smooth operation.

2. Auxiliary spool pins are not designed for twin needle sewing.
3. Depending on the size and conditions of spools of thread and spool pins, top cover cannot be

closed.

Advertising
This manual is related to the following products: