Re-stfirt to continu0 beuing, Fi tfpe, Modify return – SINGER 1500 Izek User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
!»i;
(BUTTONHOLES)
When
buttonhole
sewing
is
completed, the sewing machine will
stop automatically.
RE-STfiRT TO CONTINU0
BEUING
fi TfPE
8
► MODIFY
RETURN
Push A Button to return to
screen 3. (page 32).
Push A Button to return to
screen 2 (page 32).
Push the (Y) Control Pad
to select "E". (end sewing)
Push the A Button
Error message during setting-up
CHECK FLfiSHING
flREfi AND START
SENING MACHINE
If the sewing machine is not set up correctly, the above message
will be displayed when starting the machine.
1. Push A Button.
2. The error message will be displayed. Fix the problem following
the instructions in the message. (Refer to page 67.)
3. When the error has been cleared, screen 6 (page 32) will be
displayed.
4. Start the machine.
*The start/stop switch on the sewing machine will flash red for 2 -
3 seconds and will then change to green. However, the sewing
machine will not start again until the cause of the error has been
properly cleared, even if you try to start the machine, so make
sure that you clear the cause of the error properly.
33