To change buttonhole position – SINGER 1500 Izek User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
liiii
.(BUTTONHOLE MAKING)
;tos|
Sewing will be completed automatically in the following order.
(The finished buttonhole will be slightly outside the buttonhole
positioning mark on the fabric so it is recommended that you
carry out a test sewing first.)
Fabric marking
TvT
tl
il
f:
0
ujjir
A—\
< >
f
Buttonhole foot alignment
position
7
Fabric marking
c
W
□1
To change buttonhole position
Move
Normal buttonhole
sewing position
c
~W
□I
Move
tl
'W
if
Example of moving the buttonhole foot away
from the fabric marking in the direction of
the arrow shown in the illustration.
9. When sewing is finished, use a buttonhole opener
to open up the fabric in the center of the buttonhole.
Be careful not to cut any of the seam thread.
Ba