Performance checklist – SINGER 1500 Izek User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

7. PERFORMANCE CHECKLIST
GENERAL PROBLEMS
Machine does not sew.
* Power switch is turned off.- Turn on the switch.
Machine iams/knocks.
* Thread is caught in hook.- Clean hook (see page 65).
* Needle is damaged.- Replace needle (see page 22).
Fabric does not move.
* Presser foot is not lowered - lower presser foot.
* Stitch length is set at 0. - Set it at 1 to 4.
* Feed dog control is lowered (see page 8).
STITCHING PROBLEMS
Machine skips stitches.
* Needle is not all the way up into needle clamp. - See page
22
.
* Needle is bent or blunt. - Replace needle (see page 22).
* Machine is not threaded correctly. - See page 12.
* Thread is caught in hook. - Clean hook (see page 65).
Stitches are irregular.
* Needle size is not correct for thread and fabric. - See page
22
.
* Machine is not threaded correctly. - See page 12.
*Top thread tension is too loose. - See page 23.
* Fabric is being pulled or pushed against machine feeding
action. - Guide it gently.
* Bobbin has not been wound evenly. - Rewind bobbin.
Needle breaks.
* Fabric is being pulled or pushed against machine feeding
action. - Guide it gently.
* Needle size is not correct for thread and fabric. - See page
22
.
* Needle is not all the way up into the needle clamp (See page
22
).
THREAD PROBLEMS
Thread bunches.
* Top and bobbin threads are not drawn back under presser
foot before starting seam. - Draw both threads back under
presser foot about 4 inches (10 cm) and hold until a few
stitches are formed.
Needle thread breaks.
* Machine is not threaded correctly. - See page 12.
*Top thread tension is too tight. - See page 23.
* Needle is bent. - Replace needle (see page 22).
* Needle size is not correct for thread and fabric - See page
22
.
Bobbin thread breaks.
* Bobbin case is not threaded correctly. See page 11.
* Lint accumulates in bobbin case or hook. - Remove lint
(see page 65).
Fabric puckers.
*Top and bobbin thread tensions are too tight. - Adjust thread
tensions (see page 23).
* Stitch length is too long for sheer or soft fabric. - Shorten
stitch length.
GAME BOY
OPERATED
GAME BOY AND GAME BOY COLOR ARE TRADEMARKS OF
NINTENDO OF AMERICA INC.
© 1989, 1998 NINTENDO OF AMERICA INC.
LICENSED BY NINTENDO.
Printed in CHINA
SB