Connecting the machine, Running the machine – SINGER 7025 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Connecting the machine

Push plug into the receptacle (1) at the right

end of the machine. Then connect plug (2)

to your socket outlet.

For North America

"This appliance has a polarized (one blade

wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a
polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not modify the plug in any way".

Running the machine

To turn on machine and sewing light, press

upper portion "I" of power switch. To turn off
machine and light, press lower portion


of power switch.

To run the machine and control speed, press
the foot control with your foot. The harder

you press, the faster the machine will sew. To
stop machine, remove foot from control.


Do not operate machine without

fabric under the presser foot as this

may damage the feed and the
presser foot.


This manual is related to the following products: