Inserting a zipper, Adjusting the zipper foot – SINGER 7025 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a zipper
Needle position: ^
Stitch length: 2-5
Foot: Zipper (E)
Needle plate: General Purpose (A)
When the zipper teeth are to the left of the
• Slide the adjusting block, (1) which slides on
the pin, across to the right.
• Snap-on the foot to the left side of the pin.
When the zipper teeth are to the right of the
• Slide the adjusting block, (1) across to the
• Snap-on the foot to the right side of the pin.