SINGER 216G User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
With the thread take-up lever (No. 5) and the presser
foot both in their highest positions, thread the needle
as follows:
1. From right to
left
through
the
thread guide 1.
2.
Down and from
right to left be
tween
the
ten
sion discs 2.
3.
From there lead
the
thread
down
and
around
and
upwards
into
the
loop of the take-
up spring (3) and
pull
the
thread
taut until it slips
behind
the
small
retaining
fork
(3
a),
(see
also
Fig. 22).
4.
Upwards
behind
the
thread
guide
No. 4.
5.
From right to left
through
the
eye
of
the
take-up
lever No. 5.
6.
Down through the
thread guide 6.
7. Behind the guide 7.
8.
Through
the
thread
guide
8,
under
the
needle
clamp.
9.
And from front to rear through the eye of the
needle 9.
Fig. 10 Upper Threading
16