SINGER 216G User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig; 24
Belt Shifter
Belt Shifter. To tilt back or lo
wer
the
machine
head,
the
belt must be removed from
the band wheel by pressing
the belt shifter (Fig. 24) to
the
left
while
slowly
ope
rating
the
machine
treadle.
To
replace
the
belt,
slowly
turn the balance wheel over
toward
you.
Only
one
or
two
revolutions
ot
the
ba
lance
wheel
are
necessary
to bring the belt back to its
original place.
Changing of the Throat Plate
For certain work it is necessary to change the throat
plate. Turn the balance wheel over toward you until
the needle has reached its highest point and then
Fig. 25 Changing ol the Throat Plate
tilt the machine after having shifted the belt as
described above. Now the throat plate is tilted slowly
26