SINGER 216G User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
In case a full bobbin is not required the bobbin can
be raised by lifting lever 5, at any time desired.
Fig. 13
Winding of
the Bobbin
If through any cause the pressure of the rubber ring
against the ledge of the balance wheel is insufficient
to wind the bobbin,
.0 .
" I loosen the screw
(0, Fig. 14). Press
the
winder
lightly
until
the
rubber
ring
is
in
contact
with
the
ledge
of
the
balance
wheel
and keep it in this
position
until
screw (0) has been
tightened. The bobbin can also be wound while doing
ordinary sewing.
Fig. 14 Adjusting the Bobbin Winder
19
Advertising