Viii. use of the embroidery, Viii. use of the embroidery set —55, Viii. use of the embroidery set – SINGER 216G User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
After finishing the work replace the presser foot and
move the lever (A, Fig. 61) back to the left. By doing
this
the
machine
is
now
ready
for
normal
sewing
work.
For embroidering use embroidery silk or cotton thread
and needle size No. 8 or No. 9.
■ it
c i '........ ■-
Fig. 62
Darning a Kitchen Cloth
VIII. USE OF THE EMBROIDERY
SET
Madeira Work (Fig. 63)
The
tension
on
the
upper
thread
should
remain
normal, while the tension on the bobbin thread should
be made much tighter. The presser foot should be
removed and the presser bar lever should be lowered,
the goods, which has a pattern stamped on it, is
placed between the embroidery hoops and the holes
which
are
within
the
confines
of
the
hoops
are
punched out with the punch, using the mallet and the
52