Singer-motor, Singerlight – SINGER 216G User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The stops can be adjusted by loosening the screws
E and F. After setting the stops, the screws should
again be tightened.
The stops can be disengaged by turning thumb nut K
V
4
turn, so that the bight lever, although limited by
the stops, can be swung over the entire scale, which
is necessary, for example, to sew up an end of a zig
Fig. 28. Bight Lever Stops
zag stitch, or when barring buttonholes. After thumb
nut K is turned another V
4
turn, then the motion of
the bight lever will again be limited by the stops
C and D.
Sewing with the SINGER Class 216 Machine
Will make you even happier,
ii you will use a
S I N G E R - M O T O R
to drive the machine, and a
S I N G E R L I G H T
to aid the eyes.
30