SINGER 216G User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Then grasp the shuttle by the pin (Z, Fig. 29) located
in its center and pull it out of its shuttle race.

With a soft cloth, well saturated in oil and a pointed
stick, or with a dust brush, the shuttle race must then

be cleaned very carefully.

After the shuttle and the open shuttle race cover (D,

Fig.

29)

have

been

thoroughly

cleaned,

the

shuttle

should again be placed in the same position in the
shuttle race as it was before it was removed.

The shuttle race cover is then closed again by swing­
ing it to the right, and locked by turning lever (R)
back to the left. If a drop of oil is placed into the
shuttle race then, after the throat plate has again been
replaced, the machine will run quietly. It is necessary
to clean the shuttle race periodically even when the
machine does not seem to be clogged.

Fig. 30 Oiling Places above the Bed Plate

32

Advertising