SINGER 216G User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
on one end, as shown in Fig. 25, and then drawn
side-ways
and out of the bed plate. The replacing
of the throat plate is done in a similar manner, in
which both ends of the spring are slipped beneath
the edge of the bed plate and, while slightly tilted
sliding it into position.
To Regulate the Various Types of Stitches
The
setting
of
the
various
stitches
is
done,
as
described
in
the
following
paragraphs,
by
means
of
both levers (A & B, Fig. 26). With the bight lever (A)
the machine is set for either straight stitching or zig
zag stitching, while the position lever (B) serves as
the setting for central, left, or right needle position.
Ordinary Sewing (Fig. 26)
The machine has a mechanism for combining both a
simple straight stitch as well as a zigzag stitch. If
Fig. 26
Ordinary Sewing
NEEDLE
POSITION
the machine is to be used for straight stitching, then
the bight lever (A) must be set at 0 oh the scale S
and the position lever B must be set for central needle
position (middle position). If the machine is to be
27