Upper looper (green), Threading © ® 0 (d – SINGER 14T948DS User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Threading
© ® 0 (D
Threading / Preparation
- Disconnect machine from
electricity supply.
- Support rod with thread guide
must be fully raised.
- Open the looper cover and the
cloth plate cover.
- Turn the handwheel towards you
until needles are fully raised.
- Thread the machine in the
correct sequence.
Upper looper (Green)
-
Place the spool on the spool holder
pin.
-
Bring thread up from back to front
through guide (1).
-
Pull the thread under the protector(2)
and pass under the guider up to
go around the pre-tension(3)
-
Thread guide(4,5,6)
-
Thread looper eye(7)
17
Advertising