Threading – SINGER 14T948DS User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Threading
Left needle(Yel low)
- Place the spool on the
spool holder pin.
- Bring thread through guide( 1)
- Pull the thread under the protector(2)
and pass under the guider up to
go around the pre-tension(3)
- Thread guide(4,5)
- Thread left needle eye(6)
- Place thread under presser
foot.
After threading
When threading is complete, lower
the presser foot and close the
looper cover and cloth plate.
Note:
If the lower looper has to be re
threaded, cut both needle threads
off at the needle eye and remove
surplus thread from below. Thread
the looper and then
re-thread the needles.
23
Advertising