Step 3, Step 4 – SINGER 5430 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
S I N G E R
Step 3
1. Turn hand wheel toward your direction until needle is out
of fabric.
2. TurnthebuttonholedialonStepS.
3. Sewuntilthebeginningofthefirstsidepoint(pointD),
Step 4
1. Turn hand wheel toward your direction until needle is out of
fabric.
2. TurnthebuttonholedialonStep4.
3.
Make at least 4 stitches, ending at point
E.
4.
Lift presser foot and remove fabric from machine.
5. Carefully cut buttonhole openings with a seam ripper or
small sharp scissors.
r
A
Advertising
This manual is related to the following products: