Changing the light bulb, Removing light bulb (illustration 1), Replocingbulb (illustration 2) – SINGER 5430 User Manual
Page 98
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SINGER
■
Changing the light
bulb
BEFORE CHANGING LIGHT BULB, UNPLUG
MACHINE FROM SOCKET OUTLET.
Use original SI NG ER light bulbs only (code 98B076).
Removing light bulb (illustration 1)
1.
Loosen
screw
located
on
face
plate
and
remove
plate
by
grasping
it
around
the
bottom
edge
and
pulling
down
and
to
the left.
2.
Do
not
attempt
to
unscrew
the
light
bulb.
Push
bulb
up
into
the
socket
and
at
the
same
time,
turn
it
to
the
direction
indicatedto unlock bulb pin
3.
Pull bulbdown and outofmachine.
Replocingbulb (illustration 2)
1.
Pushnewbulbintosocketjustasfortheside-pinbetweenthe
slot
of
the
socket
by
pushing
it
up,
turn
to
the
indicated
direction to lock into position.
2.
Replace face plate again and tighten screw.
96