SINGER 201 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
To reach parts uridenieath
bed of machine, turn ma
chine back on its hinges.
Apply one drop of oil to the
places indicated by the un
lettered arrows in Fig. 33.
The gears concealed by gear cover E2, Fig’» 3 3 aic
D2 oiled through oil hole E, Fig. 31.
The gears concealed by gear cover D, Fig. 3 3 are
oiled through the space just above this cover, as
indicated by arrow
D2.
After oiling the gears at
D2
, rotate the hand wheel toward you to distribute
the oil on these gears.
Fig.
33.
Views, Showing Oiling Points in
Base of Niachine
35
Advertising