SINGER 201 User Manual

Page 60

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4. Draw material slightly back of nee­

dle, lower presser bar and start to

sew.

5

. For fine gathering, turn adjusting

screw C upward and shorten stitch.

6. For full gathering, turn adjusting

screw C downward and lengthen

stitch.

To Make a Ruffle and Sew It to a Garment

In One Operation

1. Insert material to be ruffled between

two blue blades Line 2, Fig. 66.

RUFFLING

MATERIAL^ 2

GARMENT-^

2, Place material to which ruffle is to

be attached under separator blade

Line 1, Fig. 66.

3

. Proceed same as for plain gathering.

To Make a Ruffle and Attach It
With a Facing in One Operation

1. Insert material to be ruffled between

two blue blades Line 2, Fig. 68.

Fig. 66. Correct Positions for Materials

Fig. 67. Making a Ruffle and

Attaching It In One Operation

59

Advertising
This manual is related to the following products: