To adjust the binder, Piped edge – SINGER 201 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lower binder by means of presser foot
lifter, and start to sew. Keep material
Fig. 49. Binding with Unfolded Binding
well within center slot of scroll so that
edge will be caught in binding.
To Adjust the Binder
To bring inner edge of binding closer to
the stitching, move scroll C2, Fig. 49
to the right by means of lug B2 * Fig. 49.
This is the usual adjustment when
binding straight edges.
When binding curves, move scroll to
left to bring inner edge of binding
farther from stitching and allow for
sweep of curve.
Piped Edge
To produce a piped edge on garments,
move lug B2, Fig. 50 to left to bring
Fig.
50.
Position of Garment and Binding
When Piping Edges
48