To make a hemmed seam with foot hemmer – SINGER 201 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3. Raise hemmer. Pull threads and hem
slightly from you with left hand,
then while holding threads, draw
material toward you, with right hand,
into scroll of hemmer until tacked
end is caught in hemmer, as shown in
Fig. 39.
4. Lower hemmer and start to sew,
slightly pulling threads back while
sewing. Keep mouth of hemmer
full to produce a smooth, even
hem as shown in Fig. 40.
To Make a Hemmed Seam
with Foot Hemmer
Fig. 40. Hemming Edge of Material and
Fulling Back Threads While Sewing
Fig. 41. Making a
Hemmed Seam
(First Operation')
1. When making this seam, the gar
ment must first be fitted and the edge
42
Advertising