SINGER 201 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This machine uses a 15X1 Needle
—available in sizes 9, 11, 14, 16,
18, 19 and 21.
For perfect stitching, the thread should
be selected according to the fabric to be
stitched and the needle must be the
correct size for the thread which must
pass freely through eye of needle. Select
the correct needle according to the chart
on page 9. Be sure that needle is not
blunt or bent.
'■ '4;
Raise needle bar to its highest position
and loosen thumb screw E in needle
clamp. Insert needle, with its flat side
to the left, up into the needle clamp as
far as it will go, then tighten thumb
screw E.
Fig. 6. Setting the Needle
8
Advertising