To adjust ruffler for group pleating – SINGER 201 User Manual

Page 63

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3. To increase width of pleat, move ad­

justing finger

F

back toward needle

and turn adjusting screw C down­

ward. To make a smaller pleat, turn

adjusting screw C upward. The dis­
tance between pleats is regulated by

length of stitch.

To Adjust Ruffler for Group Pleating

To make the space between groups of

pleats, raise adjusting lever E and
move it Until projection D can be
entered in small slot indicated by

star on adjusting lever E. The rufiler
will then stop pleating and plain
stitching will be made.

Fig. 73. Pleating with the Kuffler

Fig. 74. Group Pleating with Kuffler

62

Advertising
This manual is related to the following products: