To make a felled seam with foot hemmer – SINGER 201 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

of material trimmed, allowing for

about 3^ inch of seam. Insert the two

edges of material, right sides to­
gether, in the hemmer in same man­

ner as a single hem as shown in

Fig. 41. If the material is bulky,
place edge of upper piece of material

about inch left of edge of under

piece.

2. The free edge of hemmed seam may

be stitched flat to garment, if de­
sired. To do this, open the work out
flat, wrong side up, then insert the
hem in scroll of hemmer, holding

edge of hem in position while it is
being stitched. If seam is stitched
flat to garment, one row of stitching

is visible on the right side.

Fig, 41. Making a

Hemmed Seam

(^Second Operation^

To Make a Felled Seam
with Foot Hemmer

1. Place right sides of material together,

having edge of upper piece about 3^

inch to the left of edge of under

piece. Stitch the two pieces together,
using hemmer as a presser foot.

Guide both pieces by the projecting
toe of hemmer, as shown in Fig. 43.

43

Advertising
This manual is related to the following products: