Straight stitching, Stitch width selector, Needle position selector – SINGER 6215 User Manual
Page 16: Stitch length selector, Reverse stitch button, Section 3, Tnwnf
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. STRAIGHT STITCHING
0 — 5
STITCH WIDTH SELECTOR
Before you move the selectors to set
your machine for straight stitching, turn
the hand wheel toward you until needle
is above the needle plate.
Straight stitching can be performed
with pattern selector in any position;
stitch width lever must be set at i
Needle Position Selector positions
the needle in left ( ^ ), center ( ^ )or
I'ight ( J, ) needle positions.
The stitch length Indicator is num
bered 0 to 5. The lower numbers are
shorter stitches. Shorter stitches are
best for lightweight fabrics; longer
ones for heavy fabrics. To adjust the
length of your stitches, turn the dial so
that desired stitch length Is positioned
under ( • ) symbol.
• To shorten stitch length, turn dial
toward a lower number.
• To lengthen stitch length, turn dial
toward a higher number.
REVERSE STITCH BUTTON
The reverse stitch button, with the
( p ) symbol, is located In the center
of the stitch length selector.
• For reverse stitching, push in the
button and hold in place. The
machine will stitch in reverse only
as long as you keep the button