Stitch width selector, Needle position selector, Balancing flexi stitches – SINGER 6215 User Manual
Page 30: Needle position selector balancing flexi stitches
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STITCH WIDTH SELECTOR
To produce a Flexi-stitch pattern, the
stitch width selector must be moved
from straight stitch setting to any of its
other four positions. The far right patt
ern will produce the widest stitch.
Flexi-stitch patterns may be sewn in
either left ( ^ ), center ( J, ) or right
( «i ) positions. Center needle posi
tion is recommended.
You may need to adjust the Flexi-
stitch Balance selector when using a
flexi-stitch pattern in order to achieve
the correct pattern appearance.
Before you move the stitch balance
dial from its neutral position, make a
test sample using two layers of scrap
fabric. If adjustment Is required stitch
slowly and move the selector as you
• Move selector to the left to bring
stitches of the pattern together.
• Move selector to the right to separate
stitches of pattern.