Inserting a zipper – SINGER 6215 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSERTING A ZIPPER
Most zipper packages will provide complete easy to follow instructions for inserting
various types of zippers. We recommend using the zipper foot to form an even line of
stitching close to the zipper.
J
RECOMMENDED SETTINGS
Stitch Selection: Straight Stitch
Needle Position:
«¿U
Stitch Width: [j]| 11 J
Stitch Length: 2-5
Foot: Zipper (E)
Needle Plate: General Purpose (A)
When the zipper teeth are to the left
of the needle.
• Slide the adjusting block, (
1
) which
slides on the pin, all the way to the
right.
• Snap on the foot to the left side of the
pin. (See changing snap-on presser
feet.)
• Check the position of the foot by
lowering the needle into the notch on
the side of the foot, making sure it
clears the foot.
When the zipper teeth are to the right
of the needle.
• Slide the adjusting block, (
1
) all the
way to the left.
• Snap-on the foot to the right side of
the pin. (See changing snap-on
presser feet.)
• Check the position of the foot by
lowering the needle into the notch on
the side of the foot, making sure it
clears the foot.
19