Ladder seams – SINGER 6215 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
<i
I
<
6
J
LADDER SEAMS
A ladder seam made with blindstitch-
ing is functional and decorative at the
same time. Appropriate for stretch and
knit fabrics, it provides stretchable,
decoratively constructed seams and
edge finishes for collars, pockets and
necklines in sportwear and swimwear.
RECOMMENDED SETTINGS
Stitch Selection: Blindstitch
#6
Needle Position:
Stitch Width:
Stitch Length:
1
-V
2
to l-Vi
Foot: General Purpose (B)
Needle Plate: General Purpose (A)
Make a test sample to adjust thread
tension and stitch length to suit your
fabric. Needle thread tension should
be lighter than normal.
Cut and fit garment, allow Vs inch
(16mm)
seam
allowance.
Baste
seam line.
Position fabric so that the large zig
zag stitches fall on the stitching line,
towards the center of the garment.
When stitching is completed, open
the seam by pulling the fabric back
on opposite sides of seam to pro
duce a ladder effect and press seam
allowances.
25