Flexi stitch patterns, Flexi stitches, Stitch pattern selector – SINGER 6215 User Manual
Page 29: Adjusting stitch length, Section 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. FLEXI STITCH PATTERNS
In addition to straight and zig-zag stitches, your machine can produce a variety of
1 2 3
if 1 III ^
ii: 1 III >
Hi 1 III ^
1 1 III <
These stitch patterns are used for
sewing knits and other stretch
fabrics. Flexi Stitch patterns are made
by the side to side movement of the
needle along with the back and forth
movement of the feed.
Raise the needle to its highest
• Set the stitch width selector to the
straight position ( j ). (This allows
the pattern selector to be moved
• Slide the pattern selector under the
center of the desired pattern
• Turn the stitch length dial to the left
until the dot ( • ) on the dial lines
up with the dot ( • ) on the
machine, as shown.
Note: If for any reason the machine
does not start sewing your
desired pattern after aligning
the two dot symbols, push-in
on the reverse stitch button.