Caring for your machine, Removing and replacing bobbin case, To remove bobbin case – SINGER 6215 User Manual
Page 38: To replace bobbin case, Section 9, Removing arid replacing the bobbin case
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9. CARING FOR YOUR MACHINE
REMOVING AND REPLACING BOBBIN CASE
Caution: Before cleaning or adjusting
the machine, remove plug from the
socket outlet.
• Raise presser foot and needle.
• Open slide plate, remove bobbin
and remove needle plate (see
instruction on page 8).
to remove bobbin case
• Witf) a small screwdriver, turn
bobbin case holder (1) to the rear
as far as it will go.
• Lifting the left side of the bobbin
case, slide it out from machine.
to replace bobbin case
• Guide forked end (2) of bobbin case
under feed (3).
• Draw rim of bobbin case under
position plate (4). Be sure bobbin
case Is freely seated on hook race.
• Turn bobbin case holder (1) forward
as far as It will go, locking bobbin
case in place.
Note: Turn handwheel towards you to
check to make sure it is properly
replaced.
• Replace needle plate (see
instruction on page 8).
• Insert bobbin and close slide plate.