Cino FA470 - Manual (Page 114)

Command Descriptions
2-99
Reply Wi-Fi
(WF)
Descriptions
Reply the desired one or more parameters of the Wi-Fi Interface settings
Reply Wi-Fi is sent by the device in response to the Get Wi-Fi command. It sends the values for all
the desired parameters requested in the Get Wi-Fi command.
Available for F & L series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 1Dh 00h 00h 00h Variable See Below Variable 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes Variable 1 Byte 1 Byte
Parameter(s)
First Parameter ……… Last Parameter
PID Size Options ……… PID Size Options
2 Bytes 2 Bytes Variable ……… 2 Bytes 2 Bytes Variable
See Next Page
. Host Requirements
Since Reply USB COM is a device-to-host message, there is no response for this message.
. Parameter(s) Field
Set USB COM can change multiple parameters at one time, so it takes compound parameters.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field