Cino FA470 - Manual (Page 146)

Command Descriptions
2-131
Parameter(s)
< Table 6-3-2 > Get FS Operation Parameter(s) Field
Parameter PID Size
Presentation Sensitivity 00h 03h 00h 00h
Reread Delay 00h 04h 00h 00h
Good Read Delay 00h 06h 00h 00h
Hands Free Time-out 00h 08h 00h 00h
Scan Rate Control 00h 0Bh 00h 00h
Buzzer Tone Adjust 01h 00h 00h 00h
Power on beep 01h 01h 00h 00h
Power on Indication 01h 02h 00h 00h
Good Read Duration 01h 04h 00h 00h
1D Barcode Inverse Reading 02h 00h 00h 00h
Dollar Sign Control 02h 01h 00h 00h
Redundancy 02h 02h 00h 00h
Data Transmission Packet 02h 04h 00h 00h
UPC/EAN Security Level 02h 06h 00h 00h
Supplement Scan Voting 02h 08h 00h 00h
Operation Mode(FM480 & SM380 series) 20h 00h 00h 00h
NG Message Output 20h 04h 00h 00h
OK/NG Active Signal Control 20h 01h 00h 00h
OK/NG Beep Control 20h 02h 00h 00h
Scan Input Time-out 20h 03h 00h 00h
Operation Mode (FA470 & SM5700 series) 70h 00h 00h 00h
Hand-Held Mode Illumination & Aiming Control 70h 01h 00h 00h
Hand-Free Mode Decode Aiming Control 70h 02h 00h 00h
Aiming Control 70h 03h 00h 00h
Delay Aiming Timeout 70h 04h 00h 00h
Presentation Background Lighting 70h 05h 00h 00h
Center Alignment 70h 06h 00h 00h
Mobile Phone Capture 70h 07h 00h 00h