Cino FA470 - Manual (Page 178)

Command Descriptions
2-163
Reply WF System
(WF)
Descriptions
Reply the desired one or more parameters of the System Settings for Wi-Fi Scanner
Reply WF System is sent by the device in response to the Get WF System command. It sends the
values for all the desired parameters requested in the Get WF System command.
Available for F & L series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 23h 00h 00h 00h Variable See Below Variable 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes Variable 1 Byte 1 Byte
Parameter(s)
First Parameter ……… Last Parameter
PID Size Options ……… PID Size Options
2 Bytes 2 Bytes Variable ……… 2 Bytes 2 Bytes Variable
See Next Page
. Host Requirements
Since Reply SE Operation is a device-to-host message, there is no response for this message.
. Parameter(s) Field
Set SE Operation can change multiple parameters at one time, so it takes compound parameters.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field