Cino FA470 - Manual (Page 135)

Command Descriptions
2-120
Parameter(s)
< Table 6-2-2 > Get SE Operation Parameter(s) Field
Parameter PID Size
Presentation Sensitivity 00h 03h 00h 00h
Reread Delay 00h 04h 00h 00h
Good Read Delay 00h 06h 00h 00h
Scan Input Time-out 00h 07h 00h 00h
Hands Free Time-out 00h 08h 00h 00h
Time Delay To Low Power Mode 00h 09h 00h 00h
Scan Rate Control 00h 0Bh 00h 00h
Buzzer Tone Adjust 01h 00h 00h 00h
Power on beep 01h 01h 00h 00h
Good Read Duration 01h 04h 00h 00h
Good Read Indicator 01h 05h 00h 00h
1D Barcode Inverse Reading 02h 00h 00h 00h
Dollar Sign Control 02h 01h 00h 00h
Redundancy 02h 02h 00h 00h
Data Transmission Packet 02h 04h 00h 00h
UPC/EAN Security Level 02h 06h 00h 00h
Supplement Scan Voting 02h 08h 00h 00h
Operation Mode (Scan Engine) 30h 00h 00h 00h
I/O Active State 30h 01h 00h 00h
Laser Aiming Control 02h 09h 00h 00h
LED Illumination 02h 0Bh 00h 00h
Illumination Delay Duration 02h 0Ch 00h 00h