Cino FA470 - Manual (Page 17)

Command Descriptions
2-2
2.1 Communication
Get Connected MAC
(BT)
Descriptions
Get the connected scanners’ MAC addresses
This command is used when working with the SmartCradle in PICO mode.
Available for F, L & A series
Packet Format
Prefix Opcode Status Length PID Size LRC Suffix
7Eh D6h FFh FFh 00h 00h 04h FFh 00h 00h 00h 2Dh 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes 2 Bytes 2 Bytes 1 Byte 1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will send to
the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field